To penetrate corrosion and free up switches, bayonet and screw socket light globes, all light fittings, plugs and cable couplings, keeps this type of equipment corrosion free and in good serviceable order for up to 2 years.

On screw socket type light fittings, it stops corrosion and makes globes easier to unscrew when replacing.

Use nevrStic™ to protect against moisture and corrosion, refrigeration unit circuits and cable connectors and plugs used in sea, road and rail containers, warehouse cold rooms and freezing works. Helps prevent short circuit arcing and earth leakage.

Use nevrStic™ to keep relay, solenoid and regulator coils and circuits, contact arms and pivots lubricated and free from corrosion.

In high moisture or wet areas, use in these situations for more effective control against corrosion. Use nevrStic™ to lubricate relay/regulator pivot arms where higher temperature conditions prevail.

nevrStic™ is very effective in stopping condensation in this type of equipment used in cold storage rooms, freezing works, abattoirs, etc, dramatically reducing instances of short circuits and seizures caused by moisture and corrosion.

Should be used where the locations are subject to more extreme conditions, such as wharves, oceanside, salt and chemical manufacturing, desalination plants, etc.

nevrStic™ can be safely sprayed on field windings and armatures in motors and generators to protect them from moisture and corrosion, lubricates shaft bushes and small pin and ball bearings, helps prevents grounding and seizing.

For protection from moisture and corrosion caused by condensation, spray into fan motors and exhaust fan motors used in high moisture areas, such as cold rooms, freezing works, abattoirs, etc.

Use nevrStic™ on power distribution board as a preventive measure against moisture and corrosion, keeps power board relays and solenoids in good operating condition, free from moisture and corrosion. Use where these units are situated in wet areas or where more extreme climatic conditions prevail.

Products can be safely used on all direct, single and multi-phase alternating and high tension currents with the one (1) exception, when using the Aerosol Packaged, please allow a couple of minutes for the propellant gas to dissipate before switching on the current. This procedure is not required for the non-pressurized packaged products.

Frees up sticking computer and word processing equipment key board keys, keeps them free and in a smooth operating condition.

Spray nevrStic™ into soft cloth and rub into multi-pin sockets and on multi-pin plugs for protection from corrosion and electrolysis caused by condensation, stops plugs sticking and jamming in.

keeps circuits free from moisture and corrosion, stops electrolysis.

nevrStic™ stops electrolysis between aluminium and stainless steel, keeps fibre optic cable connectors corrosion and moisture free. Keeps relays, contact assemblies, circuits and wiring terminals used in telephone hand-sets, switch boards and telephone exchanges moisture and corrosion free.

In high moisture and coastal areas, nevrStic™ will protect radio and television receiver circuits and chassis from moisture and corrosion.

nevrStic™ protects marine two-way radios and other marine electronic equipment from electrolysis and corrosion caused by salt air and condensation. Can be sprayed directly into electronic equipment.

Use nevrStic™ to protect cable terminals and framework on TV antennas and satellite receivers from corrosion.