nevrStic™ is a good lubricant for drilling, tapping and thread cutting of all metals. When drilling aluminium, will dramatically reduce burring and heat generated, the drill bits run a lot cooler, giving them a lot longer service life.

nevrStic™ will reduce the instances of work hardening when used as a lubricant for the machining of stainless steel and will give this metal a clean, smooth finish.

Use nevrStic™ for drilling and tapping titanium and are not affected by cutting oil viruses or the problems associated with soluble oil type lubricants - never needs replacing, just top up the reservoir as they are used up. They will keep reservoirs, pumps and feed lines clean and free from corrosion. and can be used by a handheld applicator for individual and one-off machining applications.

nevrStic™ is a good lubricant for metal plate cutting blades as used on guillotines.

nevrStic™ lubricant will allow metal to be cleanly hole punched and stamped without sticking or jamming.

Spray or paint a liberal coat of on the plate and bars to be stamped or punched or coat the punch tool or stamp.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat..

Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

nevrStic™ is a good lubricant for wire feeders on MIG welders, stops jamming and corrosion and allows the wire to feed smoothly. Spraying the welding nozzle tip with nevrStic™ reduces damage caused by the welding process.

Spray on ferrous steel welds (especially on jobs built outside in the open air) to protect against rust forming until painting or powder coating is done. can be painted over with oil-based primers without first removing the coating.

Once cleaned with dish washing liquid, is compatible with powder coating. and is easily removed with or most water-soluble degreaser. Does not harm painted, enamelled and powder coated surfaces or finishes.

Soluble oil lubricants are not compatible with soluble oil type cutting lubricants, reservoirs and feed lines must be flushed clean before using as a cutting oil lubricant.

Because most soluble oil type cutting lubricants have no anti-corrosion component, rust and corrosion can form on lathes and milling machines using nevrStic™ as a lubricant. will protect lathes and milling machines from corrosion, but the soluble oil must be washed off first or may lose its’ effectiveness in protecting this equipment.

nevrStic™ will draw any corrosion out of the pores of the metal and quite commonly the next day after applying it, equipment can have a reddish-brown coating, this is caused by the cleaning action of drawing corrosion to the surface of the metal. By spraying on more and wiping with a coarse weave cotton cloth, it will clean away the leached corrosion deposits and allow it to continue to keep equipment clean and corrosion free.